Available Models


8 models are available in this range

3R4 Dop-Bed Triple Steerable Extendable

3 Rows of 4 Drop-Bed Triple Steerable Extendable Trailer

3R4 Dop-Bed Triple Steerable Extendable

The 3 rows of 4 Drop-bed Triple extendable is built for transporting long loads with a high GVW. This is a
low maintenance trailer with air bag suspension and hydraulics running off the truck. Non-Drop bed and
customisable options are also available

STANDARD SPECIFICATIONS
Length Max extended Length 33,000mm
Width 2500mm
Deck Height Max 900mm
Axles 3 x 15” ten stud command
Suspension Hendrickson Air
Brakes Sealco
Hydraulics Hydraulics Powered by Truck
Tyres 12 x 215 x 17.5
Wheels Steel
Spare Tyre Carriers Spare tyre carrier only Spare not supplied
Steering Knuckle steer axles Manual operation
King Pin 90mm
Landing Legs K-Hitch full weight landing legs
Deck Material Steel or timber deck

 

OPTIONAL EXTRAS
Wheels Aluminium Wheels Machined Finish
Wheels Aluminium Wheels Polished Finish
Tyres 235 x 17.5 tyres (in Lieu of 215 x 17.5)
Wheels carrier Dual spare wheel carrier
Remote Control Radio controls
Ship Locks 12 Twist locks fitted
Suspension Smallest spread sprung suspension 2500mm (Deduct)
Power Pack 5 HP Diesel Power pack if required
Storage Extra toolbox
Steering Indexed Steering from the fifth wheel
Bolster Sliding Bolster
Drop Bed Drop Deck with Double fold ramps and beaver tail

 

3R4 Steerable Triple Extendable

3 Rows of 4 Steerable Triple Extendable Trailer

3R4 Steerable Triple Extendable

The 3 Rows of 4 Steerable Triple Extendable is built for transporting long loads with a high GVW. This is a low maintenance trailer with air bag suspension and hydraulics running off the truck. Customisable
options are also available.

STANDARD SPECIFICATIONS
Length Max extended Length 38,000mm
Width 2500mm
Deck Height Max 1420mm
Axles 3 x 19.5” Straight axles
Axle Spacing 1800mm
Suspension Hendrickson Air
Brakes Sealco
Tyres 12 x 265 x 19.5 tyres
Wheels Steel Wheels
Controls Remote Control
Steering / Towing Ball race Manual steering operation
King Pin 90mm
Toolboxes x1
Landing Legs K-Hitch full weight landing legs

 

OPTIONAL EXTRAS
Wheels Aluminium Wheels Machined Finish 
Wheels Aluminium Wheels Polished Finish
Ship Locks 4 Twist locks
Power Pack 5.5HP Diesel Power pack if required
Storage Extra Toolbox
Steering Indexed Steering from the fi fth wheel

 

3A Extendable Semi Flat Top Trailer

3 Axle Extendable Semi Flat Top Trailer

3A Extendable Semi Flat Top Trailer

The 3 Axle Extendable Semi Flat Top Trailer is built for transporting long loads with a high GVW. This is a low maintenance trailer with spring suspension and hydraulics running off the truck. Customisable
options are also available.

STANDARD SECIFICATIONS
Length 13730mm
Length (Extended) 21950mm
Width 2490mm
Axles K-Hitch 20” Drum Brake axles with 22.5”x10 stud, 16½” x 7” S-Cam foundation brakes.
Suspension 9’-1” K-Hitch over slung spring suspension – 8 leaf springs.
Brakes ABS Westinghouse type with 30/30 spring brakes to all axles; all equipment complies with ADR regulations.
Tyres Twelve (12) Aeolus 11R22.5.
Wheels Twelve (12) Steel wheels – 8.25 x 22.5.
Spare Tyre Carriers One (1) off dual type.
Electrical 6mm moulded loom with 7 pin base at front, electrical loom to ADR 38 regulations. All lighting LED multi
volt.
Rub Plate Fixed high tensile fabricated plate with 90mm bolt in road train rated king pin – 2 pin position.
Toolboxes Two (2) only standard 1200 x 550 x 550 fi tted with two (2) under box mounting straps bolted to frame.
Bearer Box: Fitted behind tri-axle suspension.
Water Tank One (1) 60 litre plastic
Signage Oversize, Road Train and rear revolving amber light
Landing Legs K-Hitch 2 speed legs right hand side winding with compensating foot
Mud Guards Plastic
Ship Locks Six (6) rows of Twist locks to suit 1 x 40”, 2 x 20” or 1 x 20” Laden.
Winches Eleven (11) Sliding Winches in tracks
Gate Carrier Provision only
Load Racks  Two (2) off pipe racks with pipe cross bars fitted between uprights
Frame Construction Front and rear main rail sections are fabricated hi tensile Beams with Rollers Fitted at Junction of Pull out
Section and Cradle Rollers at Tail End of Front Beam Section for easy sliding.
Cross Members RSJ section 102 x 45 fitted through plasma cut main rail webs.
Coaming 125 x 65 (5”) RSJ style side coaming.
Tie Rail 25mm NB pipe with posts on end of each cross member.
Front & Rear Bolster Cast corners on pressed section, front bolster and RHS rear bolster with integral load rack pockets and 20mm
NB pipe tie rails.
Bumper RHS verticals and RHS rear under run protection bar suitably supported and welded to rear under the main
frame.
Floor 3mm steel chequer plate flooring supported by 30 x 30 RHS runners. Extra floor runners

 

OPTIONAL EXTRAS
Wheels Aluminium Wheels Machined Finish 
Wheels Aluminium Wheels Polished Finish 
Tyres Specific branded tyres. (Please State)
Tyres Extra spare Tyre and Steel wheel.
Railing Gates and Headboard
Water Tank Stainless Water tank and Tap

44m Triple Extendable Beam Set

44 Metre Triple Extendable Beam Set

44m Triple Extendable Beam Set

Designed to be coupled with a Prime Mover or Dolly and Jinker, the 44 Metre Extendable Beam set allows a extremely long load to be carried, which would not fi t on a standard transport trailer.

STANDARD SPECIFICATIONS 
Max Length – 44,000mm
 Width – 2500mm
King Pin – MTE 90mm
Positions – 4 Sets of positions for a 4R4 Jinker
Tare – 9,000kg
Capacity – 50,000kg

 

3R4 Extendable & Deck Widener Trailer

3 Rows of 4 Extendable & Deck Widener

3R4 Extendable & Deck Widener Trailer

The 3 Rows of 4 Extending and Deck Widener is a strong and robust trailer designed for the transport of heavy plant and machinery. Extending and Deck wideners are used mainly where wide machines need to be transported into areas where access is difficult. The wheels stay at 2.5m wide but decks can widen up to 3.5m and extend to a custom length to suit the size of the load.

STANDARD SPECIFICATIONS
Widening – Closed 2500mm – Open 3500mm
Axles – MTE 17.5”
Axle Spacing – 1250mm – 1250mm
Suspension – Hendrickson Airbag Suspension
Brakes – Outboard Drum Brakes
Brakes – Full air brakes to ADR, Australian compliance plate
Greasing – Manual
Tyres – 215 x 75 x 17.5
Wheels – Steel wheels
Spare Tyre Carriers – 2
Lighting – LED
Controls – Control mounted on the driver’s side
Rub Plate – Fixed Position
King Pin – 2” or 3 ½” King pin
Ramps – Eco Tail sliding ramp
Toolboxes- 2 XL toolboxes fitted in coaming – (totals to 8 small due to container locks)
Signage – “Do Not Overtake turning Vehicle” and “Oversize”
Landing Legs – Wind down support legs
Deck Material – Steel 80 Grade 6mm High Tensile plate floor
Top Deck – Flip over style gooseneck deck
Pontoon – 1250mm pontoon width bottom decks

 

OPTIONAL EXTRAS
Wheels – Aluminium Wheels Machined Finish 
Wheels – Aluminium Wheels Polished Finish
Tyres – Specific branded tyres. (Please State)
Ramps – Bi-fold ramps – 2700mm & 1200 x 900mm. Quick release coupling
Ship Locks – 3 way container locks
Axles – MTE 19.5” axles and 265 tyres
Suspension – Hydraulic suspension
Power Pack – 5 HP Petrol Power Pack
Water Tank – Plastic Water Tank
Gooseneck – 2 position dolly gooseneck
Top Deck – Fold Up top Deck
Extendable – 1st Extension (1 x 3,800mm) plus extra widening cylinders
Extendable – 2nd Extension (1 x 3,700mm)

 

4R4 Extendable & Deck Widener Trailer

4 Rows of 4 Extendable & Deck Widener Trailer

4R4 Extendable & Deck Widener Trailer

The 4 Rows of 4 Extending and Deck Widener is a strong and robust trailer designed for the transport of heavy plant and machinery. Extending and Deck wideners are used mainly where wide machines need to be transported into areas where access is difficult. The wheels stay at 2.5m wide but decks can widen up to 3.5m and extend to a custom length to suit the size of the load.

 

STANDARD SPECIFICATIONS
Widening Closed 2500mm – Open 3500mm
Axles 19.5” Disc Brake BPW Axles
Axle Spacing 1250mm – 1250mm – 1250mm
Axle Retraction Axle lift on 1st Axle and 4th Axle (2 different lengths of hooks)
Suspension BPW Airbag Suspension.
Brakes Disc Brake
Brakes Full air brakes to ADR. With ABS Australian compliance plate.
Greasing Manual greasing
Tyres 265 x 75 x 19.5
Wheels Steel wheels
Spare Tyre Carriers 2
Lighting LED
Controls Control mounted on the driver’s side
Rub Plate Two position
King Pin 2” or 3 ½” King pin
Ramps Bi-fold ramps – 2700mm & 1200 x 900mm. Quick release coupling
Toolboxes 4 XL toolboxes fitted in coaming – (totals to 8 small due to container locks)
Signage “Do Not Overtake turning Vehicle” and “Oversize”
Landing Legs Wind down support legs
Deck Material Steel 80 Grade 6mm High Tensile plate floor.
Top Deck Fold Up top Deck
Pontoon 1250mm pontoon width decks

 

OPTIONAL EXTRAS
Wheels – Aluminium Wheels Machined Finish
Wheels – Aluminium Wheels Polished Finish 
Tyres – Specific branded tyres. (Please State)
Ship Locks – 3 way container locks
Suspension – Hendrickson Air Suspension
Brakes – MTE 19.5 Drum Brakes
Power Pack – 5 HP Petrol Power Pack
Water Tank – Plastic Water Tank
Extendable – 1st Extension (1 x 3,800mm) plus extra widening cylinders
Extendable – 2nd Extension (1 x 3,700mm)

 

4R4 Swingwide Trailer

4 Rows of 4 Swingwide Trailer

4R4 Swingwide Trailer

The 4 Rows of 4 Swingwide is a strong and robust trailer designed for the transport of awkward size loads and machinery. Due to its large GVM, it is able to securely and safely load your heavy duty gear.

STANDARD SPECIFICATIONS
Deck Height 950mm
Widening Width 2500mm closed Width 4000mm open
Axles 15″ Ten stud
Axle Spacing 1220mm – 2400mm – 1220mm
Suspension Hydraulic Suspension
Brakes 12 ¼” x 7 ½” brakes with outboard drums
Brakes Full air brakes to ADR
Greasing Grease nipples to suspension pins
Tyres 215 x 17.5
Wheels Steel Wheels
Spare Tyre Carriers 2 Spare tyre carriers
Lighting LED
Rub Plate Hydraulic raising rub plate
Ramps 2800mm x 850mm
Signage Signs “Do Not Overtake Turning Vehicle” and “OVERSIZE” will be fitted
Deck Material Steel 80 grade high tensile Deck plate 6mm
Drop Bed 300mm Drop Bed

 

OPTIONAL EXTRAS
Wheels Aluminium Wheels Machined Finish 
Wheels Aluminium Wheels Polished Finish 
Tyres Extra spare Tyre and Steel wheel.
Tyres Specific branded tyres. (Please State)
Ramps Double Fold Ramps 3700mm x 900mm
Greasing Central greasing with timer
Ship Locks Twist locks to suit 1 x 40’0” – 1 x20’0” container
Power Pack 5.5HP Petrol Power pack 2000PSI mounted under gooseneck Bottom deck
Power Pack 5.5HP Diesel Power pack 2000PSI mounted under gooseneck Bottom deck
Electrical Air, Electrical lead and Hydraulic Hose
Storage Toolbox fitted
Water Tank Plastic Water Tank fitted
Yard Release Yard release Dual system

 

3 Axle Drop Deck Extendable Float

3 Axle Drop Deck Extendable Float

3 Axle Drop Deck Extendable Float

The 3 Axle Drop Deck Float is built for transporting larger heavy equipment with a high GVW. This is a low maintenance trailer with extendable length, air bag suspension, optional plywood decks and hydraulics that run off the truck. Customisable options are available.

STANDARD SPECIFICIATIONS
Width 2490mm
Deck Height 950mm
Axles 15” Axles
Axle Spacing 1250mm – 1250mm
Suspension Air Suspension
Brakes Outboard Drums 12-1/4” x 7-1/2” with Outboard Drums
Brakes ADR with ABS Brakes
Hydraulics All lines to have removable couplings
Tyres 215 x 17.5
Wheels Steel Wheels
Lighting LED & Lights in rear bumper & Beacon in ramps
Ringfeder Ring feeder mount
Ramps Hydraulic Ramps 2700mm x 860mm
Ramps Ramps to top deck
Toolboxes 2 x tool boxes
Signage Over size signs
Landing Legs Heavy Duty landing legs
Deck Material 5mm plate deck
Tie Down Points Tie down points on top of deck
Ship Locks 3 way container locks ( must suit 40’ container on bottom deck)

 

OPTIONAL EXTRAS
Wheels Aluminium Wheels Machined Finish
Wheels Aluminium Wheels Polished Finish 
Tyres Extra spare Tyre and Steel wheel.
Tyres Specific branded tyres. (Please State)
Ramps Double fold Ramps
Ship Locks 3 way container locks
Power Pack Electric Power pack 12Volt
Power Pack 5.5 HP Honda power pack
Gates 15 – 2.0m x 1.5m gates